如果要維護自動攪拌一體機電機,電機將繼續運行。日常維護非常重要:電機工作時,請勿過于顛簸,以免損壞電機或縮短使用壽命?;烁L的時間?還要檢查外觀,風扇是否工作正常,是否有異常振動,聯軸器是否可靠,底座是否固定,軸承是否正常工作(聽聲音),溫度是否正常(紅外線))溫度計,以及電流是否正常。型號電流表),除了繞線電機外,還要檢查碳刷和滑環。如果自動攪拌一體機在一個方面是異常的,則需要快速執行電動機維護和處理。否則,情況嚴重后,將不予處理。
If the motor of the automatic mixer is to be maintained, the motor will continue to run. Daily maintenance is very important: when the motor is working, do not bump too much, so as not to damage the motor or shorten its service life. Took longer? Also check the appearance, whether the fan works normally, whether there is abnormal vibration, whether the coupling is reliable, whether the base is fixed, whether the bearing works normally (listen to the sound), whether the temperature is normal (infrared) thermometer, and whether the current is normal. In addition to the winding motor, check the carbon brush and slip ring. If the automatic mixer is abnormal in one aspect, it needs to carry out motor maintenance and treatment quickly. Otherwise, if the situation is serious, it will not be dealt with.
自動攪拌一體機操作員技能:攪拌一體機對操作和維護人員的要求較低。該設備結構復雜,自動化程度高,對操作員和維護人員的要求很高。操作員應始終對自動攪拌一體機設備的組件間隙進行適當調整。
Automatic mixing machine operator skills: mixing machine on the operation and maintenance of low requirements. The equipment has complex structure, high degree of automation and high requirements for operators and maintenance personnel. The operator should always properly adjust the component clearance of the automatic mixer equipment.
如遇惡劣天氣,自動攪拌一體機請及時停止工作。夜間工作應有足夠的照明條件;如果在整個操作過程中出現異常和模糊,應立即暫停工作并報告給項目部員和機械經理。
In case of bad weather, please stop working in time. Sufficient lighting conditions shall be provided for night work; In case of any abnormality or ambiguity during the whole operation, the work shall be suspended immediately and reported to the safety officer and mechanical manager of the project department.
自動攪拌一體機的提升位置應由人員指定。指揮官應佩戴一個獨特的標志并站在位置,以便駕駛員能夠看到指令信號。發送的命令信號清晰準確。在負荷下降之前,指揮官確認著陸區域的,起重機應注意著陸信號。司機應該按照指揮官的信號工作。當信號不清楚或錯誤時,駕駛員可以拒絕執行。
The lifting position of the automatic mixer shall be designated by personnel. The commander should wear a unique sign and stand in a safe position so that the driver can see the command signal. The command signal sent is clear and accurate. Before the load drops, the commander shall confirm the safety of the landing area, and the crane shall pay attention to the landing signal. The driver should follow the commander's signal. When the signal is not clear or wrong, the driver can refuse to execute.