自動攪拌一體車這種設備具有很多優點,能夠大大提高生產作業的效率。但是,隨著油價的上漲,怎樣能節省油耗成為了人們關心的問題,而攪拌車作為建筑工程類車輛,節省油耗顯得更為重要,怎么做才能降低自動攪拌一體車的油耗呢?下面為大家提供一些小竅門,一起來了解一下吧!
This equipment has many advantages, can greatly improve the efficiency of production. However, with the rise of oil prices, how to save fuel consumption has become a concern. As a construction engineering vehicle, it is more important to save fuel consumption. How to reduce the fuel consumption of automatic mixer? Here to provide you with some tips, let's understand it!
1.自動攪拌一體車火花塞使用的時間太長,也會出現油耗加大的現象。因為火花塞損壞會使焚燒的能量下降,使攪拌車提速減慢,導致柴油耗損明顯增加,只要更換火花塞就好了。
1. If the spark plug of automatic mixer truck is used for a long time, the fuel consumption will increase. Because the damage of spark plug will reduce the energy of incineration, slow down the speed of mixer, and increase the consumption of diesel obviously. Just replace the spark plug.
2.在行駛中發現攪拌車現在的滑行距離明顯減少,這時司機們應該檢查一下攪拌車的輪胎氣壓是否合乎氣壓標準。若輪胎充氣不足,耗油量也會增加。因此需要適時為輪胎充足氣。
2. In the process of driving, it is found that the taxi distance of the mixer is significantly reduced. At this time, the drivers should check whether the tire pressure of the mixer meets the air pressure standard. If the tire is under inflated, the fuel consumption will also increase. Therefore, it is necessary to inflate the tire in time.
3.在自動攪拌一體車行駛中或啟動時發現車輪有異常響聲,網友們應該及時檢查軸承及剎車系統是否有故障。如果車輪轉動不正常,就會影響攪拌車的車速,使油耗加大。檢修軸承及剎車系統,減少油耗。
3. If the wheels make abnormal noises when the truck is running or starting, netizens should check the bearing and brake system in time. If the wheel rotation is not normal, it will affect the speed of the mixer and increase the fuel consumption. Overhaul the bearing and brake system to reduce fuel consumption.
4.當自動攪拌一體車的溫控開關和節溫器損壞時,會呈現油耗增加的現象。因為溫控開關和節溫器損壞會使水溫低落,化油器不能正常工作,導致混凝土攪拌車霧化不好,油耗量明顯增加。長時間行駛時,凡是會出現汽缸壓力不符的現象,這時油耗也會明顯增加。同時如果出現這種情況,那么就需要大修了。
4. When the temperature control switch and thermostat are damaged, the fuel consumption will increase. Because the temperature control switch and thermostat damage will make the water temperature low, the carburetor can not work normally, resulting in poor atomization of concrete mixer, and the fuel consumption increases significantly. When driving for a long time, the cylinder pressure will not match, and the fuel consumption will increase obviously. At the same time, if this happens, then it needs to be overhauled.