由于現在農村建設發展快,人們對小型混凝土自動上料攪拌車的需求不斷增加。大型混凝土自動上料攪拌車造價高、維修費用高,因此在建設中小型混凝土自動上料攪拌車成逐步增加趨勢。今天小編給大家講解的是小型混凝土自動上料攪拌車的使用維護保養要點,下面一起來看看吧!
Due to the rapid development of rural construction, people's demand for small automatic concrete mixer is increasing. The cost of large automatic concrete loading mixers is high, and the maintenance cost is high. Therefore, the construction of small and medium-sized automatic concrete loading mixers is gradually increasing. Today, Xiaobian explained the key points of the use and maintenance of small concrete automatic feeding mixer. Let's take a look!
1.液壓驅動系統:液壓系統是攪拌車的核心系統。為保證攪拌車能正常工作,攪拌罐能運轉正常,在每次車輛發動前檢查油路散熱器和減速機的液壓油位,保證油位指示在視窗范圍內。同時要保證其清潔性,以免塵粒和水分等污染系統液壓油,造成系統不能正常工作或損壞。
1. Hydraulic drive system: the hydraulic system is the core system of the mixer truck. To ensure that the mixer truck can work normally and the mixing tank can operate normally, check the hydraulic oil level of the oil radiator and reducer before starting the vehicle each time to ensure that the oil level indication is within the window range. At the same time, ensure its cleanliness to avoid contamination of the hydraulic oil of the system by dust particles and moisture, which may cause the system to fail to work normally or be damaged.
2.供水系統:氣壓供水系統加水量一般在水箱的四分之三處為宜;車輛在行駛時水路系統中各個閥門均應處于關閉狀態,以免影響車輛的制動性能,或燒結摩擦片,從而影響車輛的制動性能。禁止隨意焊接和改動水箱,避免重物撞擊;經常檢查閥體是否堵塞或是否有工作異常;在有結冰可能的環境中使用時,供水系統排空存水,防止管路凍裂;經常檢查系統的密封性,拆卸修理后,關鍵部位要涂螺紋密封膠。
2. Water supply system: the water volume of the pneumatic water supply system is generally three quarters of the water tank; All valves in the waterway system shall be closed when the vehicle is running, so as not to affect the braking performance of the vehicle, or sinter friction plates, thereby affecting the braking performance of the vehicle. It is prohibited to weld and change the water tank at will to avoid heavy object impact; Check the valve body frequently for blockage or abnormal operation; When it is used in an environment with the possibility of icing, the water supply system shall drain the stored water to prevent the pipeline from freezing; Check the tightness of the system frequently. After disassembly and repair, apply thread sealant to key parts.
3.攪拌筒:初次使用50h要及時檢查罐體及其他部位螺栓是否有松動,每天行車前要檢查托輪與滾道的潤滑,每個月打開一次托輪護罩,清理內部的油污并添加潤滑油脂。
3. Mixing drum: after 50 hours of initial use, timely check whether the bolts on the tank body and other parts are loose. Before driving every day, check the lubrication of the supporting wheel and raceway, open the supporting wheel shield once a month, clean the internal oil stain and add lubricating grease.
以上就是為大家介紹的有關自動攪拌一體車的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.sumtokenco.com/
The above is a detailed introduction to the automatic mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.sumtokenco.com/